Volca Power Hub Cables, 4 pack



Connects your Korg Volca or other item on the compatibility list to the power hub on a Korg Volca Mix mixer or a KVgear Vixen mixer.  Length is 6' (1.8m) each.  A straight connector on one end allows for connection to the tightly packed Vixen power hub.  A right angle connector on the other end positions the cable away from the Volca top panel, eliminating clutter and leaving more room for you to perform.  

NOTE:  The Vixen power hub is essentially a daisy chain cable incorporated into the printed circuit board.  In many cases the hub can be used without experiencing ground hum noise.  But in some circumstances, one or more devices in the chain cause noise due to differential ground voltage.  There are many solutions to ground hum noise outlined in the troubleshooting procedures in the FAQ.  One simple solution is to use an audio isolation cable on the synth (or synths) that are causing the noise.  We have found that the PAC SNI-1/3.5 cable does a great job at a reasonable price.  By ordering the Vixen, you agree that you are aware of the risk of ground hum and that responsibility for troubleshooting will be yours.  KVgear is happy to offer advice, but we cannot accept returns due to ground hum.

Compatible devices are:

  • electribe, electribe sampler
  • KR mini
  • microKORG XL, microKORG XL+
  • microSTATION
  • minilogue
  • monologue
  • monotribe
  • MS-20 mini
  • Pitchblack Pro
  • RK-100S
  • tinyPIANO
  • volca bass, beats, fm, keys, sample, sample OK GO edition, kick
  • WAVEDRUM Global Edition, WAVEDRUM Mini